getpdf  NLM-PubMed-Logo  doi: 10.17113/ftb.

Adsorption Characteristics of Different Adsorbents and Iron(III) Salt for Removing As(V) from Water

Josip Ćurko, Marin Matošić, Vlado Crnek, Višnja Stulić and Ivan Mijatović*

Faculty of Food Technology and Biotechnology, University of Zagreb, Pierottijeva 6, HR-10000 Zagreb, Croatia

Article history:
Received  January 13, 2015
Accepted December 9, 2015

Key words:
arsenic removal, drinking water, adsorption

The aim of this study is to determine the adsorption performance of three types of adsorbents for removal of As(V) from water: Bayoxide® E33 (granular iron(III) oxide), Titansorb® (granular titanium oxide) and a suspension of precipitated iron(III) hydroxide. Results of As(V) adsorption stoichiometry of two commercial adsorbents and precipitated iron(III) hydroxide in tap and demineralized water were fitted to Freundlich and Langmuir adsorption isotherm equations, from which adsorption constants and adsorption capacity were calculated. The separation factor RL for the three adsorbents ranged from 0.04 to 0.61, indicating effective adsorption. Precipitated iron(III) hydroxide had the greatest, while Titansorb had the lowest capacity to adsorb As(V). Comparison of adsorption from tap or demineralized water showed that Bayoxide and precipitated iron(III) hydroxide had higher adsorption capacity in demineralized water, whereas Titansorb showed a slightly higher capacity in tap water. These results provide mechanistic insights into how commonly used adsorbents remove As(V) from water.

*Corresponding author:  email3 This email address is being protected from spambots. You need JavaScript enabled to view it.
                                      tel3 +385 1 4605 131

                                      fax2 +385 1 4605 072